Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Sanyo
  4. 1080HD
  5. Manual Do Utilizador

Sanyo 1080HD Manual Do Utilizador

Download
Página de 60
18
Connect the projector’s AC power cord into an AC outlet and 
turn the Main On/Off switch on. The POWER indicator lights 
red. 
Press the POWER ON/STAND-BY button on the top control or 
on the remote control. 
The POWER indicator turns green and the cooling fans start to 
operate. As the automatic slide shutter opens, a preparation 
display appears on the screen and the countdown starts. 
2
3
1
4
After the countdown, the input source that was selected the  
last time appears on the screen. 
Turning On the Projector
Complete peripheral connections (with a computer, VCR, 
etc.) before turning on the projector.  
Selected Input Source
OFF
ON
Main On/Off switch
✔
Note:
 • If the automatic slide shutter does not open properly, the projector
will not be turned on and the POWER indicator will blink orange.
Press the POWER ON/STAND-BY button again to restart.
 • When “Countdown off” or “Off” is selected in the Display function,
the countdown will not be displayed on the screen (p.40).
 • During the countdown period, all operations are invalid.
 • Image may look dark for a while after turning on the projector.
Lamp needs some time to stabilize after the power is turned on.
Stored lamp mode and the image mode will be active after the
lamp is stabilized.
 • When the shutter is manually closed slightly during projection, the
shutter will be automatically closed.
Automatic Slide Shutter
Do not touch the slide shutter while it is 
moving, as this could cause injury or the 
projector to malfunction.
Use this tab when handling manually.
Basic Operation
Top Control
Remote Control
POWER indicator
POWER 
ON/STAND-By 
button