Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Benq
  4. MP777
  5. Manual Do Utilizador

Benq MP777 Manual Do Utilizador

Download
Página de 67
Operation
40
Controlling the projector through a Lan 
Controlling the projector through a Lan 
Controlling the projector through a Lan 
Controlling the projector through a Lan 
environment
environment
environment
environment
Lan Control Settings
Lan Control Settings
Lan Control Settings
Lan Control Settings allow you to manage the projector from a computer using a web 
browser when the computer and the projector are properly connected to the same local area 
network. 
Configuring the 
Configuring the 
Configuring the 
Configuring the Lan Control Settings
Lan Control Settings
Lan Control Settings
Lan Control Settings
If you are in a DHCP environment:
If you are in a DHCP environment:
If you are in a DHCP environment:
If you are in a DHCP environment:
1.
Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector 
and the other end to the RJ45 port.
2.
Press MENU/EXIT
MENU/EXIT
MENU/EXIT
MENU/EXIT and then press  /
 until the SYSTEM SETUP: Advanced
SYSTEM SETUP: Advanced
SYSTEM SETUP: Advanced
SYSTEM SETUP: Advanced menu 
is highlighted.
3.
Press   to highlight Lan Control Settings
Lan Control Settings
Lan Control Settings
Lan Control Settings and press MODE/ENTER
MODE/ENTER
MODE/ENTER
MODE/ENTER. The Lan Control 
Lan Control 
Lan Control 
Lan Control 
Settings
Settings
Settings
Settings page displays.
4.
Press  
to 
highlight 
Control 
By
Control By
Control By
Control By and press  /
 to select RJ45
RJ45
RJ45
RJ45.
5.
Press  
to 
highlight 
DHCP
DHCP
DHCP
DHCP and press  /
 to select On
On
On
On.
6.
Press  
to 
highlight 
Apply
Apply
Apply
Apply and press MODE/ENTER
MODE/ENTER
MODE/ENTER
MODE/ENTER.
7.
Re-enter the Lan Control Settings
Lan Control Settings
Lan Control Settings
Lan Control Settings page. The Projector IP Address
Projector IP Address
Projector IP Address
Projector IP Address, Subnet Mask
Subnet Mask
Subnet Mask
Subnet Mask, 
Default Gateway
Default Gateway
Default Gateway
Default Gateway, and DNS Server
DNS Server
DNS Server
DNS Server settings will display. Note down the IP address 
displayed in the Projector IP Address
Projector IP Address
Projector IP Address
Projector IP Address row.
If the Projector IP Address still does not display, contact your ITS administrator.
If you are in a non-DHCP environment:
If you are in a non-DHCP environment:
If you are in a non-DHCP environment:
If you are in a non-DHCP environment:
1.
Repeat steps 1-4 above.
2.
Press  
to 
highlight 
DHCP
DHCP
DHCP
DHCP and press  /
 to select Off
Off
Off
Off.
3.
Contact your ITS administrator for information on the Projector IP Address
Projector IP Address
Projector IP Address
Projector IP Address, Subnet 
Subnet 
Subnet 
Subnet 
Mask
Mask
Mask
Mask, Default Gateway
Default Gateway
Default Gateway
Default Gateway, and DNS Server
DNS Server
DNS Server
DNS Server settings.
4.
Press   to select the item you want to modify and press Mode/Enter
Mode/Enter
Mode/Enter
Mode/Enter.
5.
Press  /
 to move the cursor and the press 
/  to enter the value.
6.
To save the settings, press Mode/Enter
Mode/Enter
Mode/Enter
Mode/Enter. If you do not want to save the settings, press 
Menu/Exit
Menu/Exit
Menu/Exit
Menu/Exit.
7.
Press  
to 
highlight 
Apply
Apply
Apply
Apply and press MODE/ENTER
MODE/ENTER
MODE/ENTER
MODE/ENTER.