Vidikron Vision 15ET/CineWideTM Manual Do Utilizador

Other considerations and tips that can help improve your installation:

•

Keep the ambient temperature constant and below 35°C (95°F). Keep the projector away 
from heating and/or air conditioning vents. Changes in temperature may cause drifts in 
the projector circuitry, which may affect performance.

•

Keep the projector away from devices that radiate electromagnetic energy such as motors 
and transformers. Common sources of these include slide projectors, speakers, power 
amplifiers and elevators. 

If you are installing a Vision 15ET/CineWide, proceed as follows to install the CineWide 
anamorphic lens base plate. Otherwise, skip this step and proceed with Mounting the Vision 
15 (page 22). 

To install the fixed CineWide base plate on a Vision 15ET/CineWide:

1.

Place the projector upside down on a blanket or other soft surface.

2.

Line up the three mounting holes on the CineWide base plate with those on the bottom 
of the projector.

3.

If you are mounting the Vision 15ET/CineWide on a ceiling: Line up the three holes 
on the projector ceiling mounting plate (included with the projector ceiling mount kit) 
with those on the bottom of the projector.

4.

Secure the CineWide base plate (and ceiling mounting plate, if needed) to the projector 
with the M4x14mm screws provided with the CineWide lens base plate. See Figure 3-7. 

 

➤