Vidikron Vision 15ET/CineWideTM Manual Do Utilizador
Vidikron Vision Model 15 Installation/Operation Manual
45
To access the Installation adjustments, press MENU, then press the
or
button to
highlight Installation and press ENTER. The Installation sub-menu appears. Press EXIT to
return to the previous menu or press MENU to close all menus.
return to the previous menu or press MENU to close all menus.
or
button to select from the available languages: English, French, Spanish, German and
Italian.
or
button to change the orientation of the projected image. The Vision 15 can be
installed on a ceiling or in a rear-screen configuration with one or more mirrors. There are
four settings: Floor Front, Ceiling Front, Floor Rear and Ceiling Rear.
four settings: Floor Front, Ceiling Front, Floor Rear and Ceiling Rear.
Keystone: Projector placement and other factors can cause geometric distortion in the
projected image. To correct this, select Keystone from the Installation menu. This sub-menu
provides the following options:
projected image. To correct this, select Keystone from the Installation menu. This sub-menu
provides the following options:
• V. Keystone/H. Keystone: To correct distortion resulting from the angle of projection,
or
button to
make the image rectangular. See Figure 4-6.
When you change a setting in the Installation menu, the change takes effect
immediately; you do not need to press ENTER afterwards. (Press EXIT to
return to the previous menu or MENU to exit.)
immediately; you do not need to press ENTER afterwards. (Press EXIT to
return to the previous menu or MENU to exit.)
Note
0
0
Vidikron recommends that the keystone feature not be used unless
absolutely necessary, as it may cause artifacts in the image.
absolutely necessary, as it may cause artifacts in the image.
1. The Vision 15 keystone correction can compensate for up to
approximately 15 degrees of screen and/or projector tilt.
2. Straight lines or the edges of images may appear jagged while adjusting
the image.
Tip
Note