Vidikron Vision 15 Manual Do Utilizador
30
Vidikron Vision Model 15 Installation/Operation Manual
3.8
Changing the OSD
Language
Changing the OSD
Language
The Vision 15 OSD language is initially set to English, but can also display the menus in
French, Spanish, Italian or German. To change the OSD language:
French, Spanish, Italian or German. To change the OSD language:
1.
Press MENU.
2.
Select Installation from the Main Menu and press ENTER.
3.
Select Language from the Installation Menu and press ENTER.
4.
Press
or
to highlight the desired language and press ENTER.
3.9
Adjusting the Picture
Orientation
Adjusting the Picture
Orientation
By default, the Vision 15 is configured for a “floor/front” installation, in which the projector is
installed upright and in front of the screen. If it is installed behind the screen and/or mounted
on a ceiling, you must change the picture orientation. To do this:
installed upright and in front of the screen. If it is installed behind the screen and/or mounted
on a ceiling, you must change the picture orientation. To do this:
1.
Press MENU on the remote control.
2.
Select Installation from the Main Menu and press ENTER.
3.
Select Orientation from the Installation Menu and press ENTER.
4.
Choose Floor Rear, Ceiling Front or Ceiling Rear to match the installation method.