Viewsonic PJD7383I Manual Do Utilizador

Operation

37

In addition to selecting the projector preset startup screen from among ViewSonic logo, 

Black or Blue screen, you can make your own startup screen that is a picture projected from 

your computer or video source.

To create your own startup screen, project the picture you want to use as your startup screen 

from either a computer or video source. The rest of the steps are as follows.

1.

Press MENU/EXIT on the projector or Menu on the remote control and then press 

/  until the SYSTEM SETUP: Basic menu is highlighted.

2.

Press  

to 

highlight 

Screen Capture and press MODE/ENTER on the projector or 

ENTER on the remote control.

3.

A confirmation message is displayed. Press MODE/ENTER on the projector or 
ENTER on the remote control again.

4.

The message 'Screen Capturing...' is displayed while the projector is processing the 
picture. Please wait.

5.

If the action is successful, you see the message 'Capture Succeeded' on the screen. 
The captured picture is saved as Screen Capture.

6.

To view the captured picture displayed as the startup screen, set Screen Capture in 
the SYSTEM SETUP: Basic > Splash Screen menu and restart the projector.

In the unlikely event that the capturing action fails, change your target picture. When the 

resolution of the input signal is higher than the projector’s native display resolution (See 

for details.), the capture action may fail. When it 

happens, please set the resolution of the input signal under native resolution and try again.