Sony VPL-HS2 Manual Do Utilizador

GB 

30

Troubleshooting

The LAMP/COVER or TEMP/FAN indicator on the 
control panel lights up or flashes if there is any trouble 
with your projector.

Use the list below to check the meaning of the 
messages displayed on the screen.

Use the list below to check the meaning of the 
messages displayed on the screen.

LAMP/COVER 
flashes.

c Attach the lamp cover or the air filter 

cover securely. (

1 pages 31 and 32)

LAMP/COVER 
lights up.

c The lamp has reached the end of its 

life. Replace the lamp. (

c The lamp becomes a high temperature. 

Wait for one minute to cool down the 
lamp and turn on the power again. (

TEMP/FAN 
flashes.

c The fan is broken. Consult with 

qualified Sony personnel.

TEMP/FAN 
lights up.

c The internal temperature is unusually 

high. Check to see if nothing is 
blocking the ventilation holes.

LAMP/COVER 
and TEMP/FAN 
light up.

c The electrical system breaks down. 

Consult with qualified Sony 
personnel.

High temp.! 
Lamp off in 1 
min.

c Turn off the power.
c Check to see if nothing is blocking the 

ventilation holes.

Frequency is 
out of range!

c Input a signal that is within the 

acceptable range of the frequency.

c Set the output signal on an external 

monitor of the connected computer to 
SVGA.

Please check 
Input-A Signal 
Sel.

c Set “Input-A Signal Sel.” in the SET 

SETTING 

 menu to “Computer” 

when RGB signal is input from the 
computer. (

Please replace 
the LAMP.

c It is time to replace the lamp. Replace 

the lamp. (

Please replace 
the filter.

c It is time to replace the air filter. Replace 

the air filter. (

NO INPUT

c No signal is input. Check connections. 

Not applicable!

c Press the appropriate button.