Sony VPL-AW10 Manual

 

46

The Setup menu is used to change the factory preset settings, etc.

Sets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for the menus, 
message when turning off the power, and warning messages.

Selects the language used in the menu and on-screen displays. 
Available languages are: English, Dutch, French, Italian, German, 
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese, 
Chinese (Simplified Chinese), Chinese (Traditional Chinese), 
Korean, Thai and Arabic.

Use this item when using the projector at high altitudes.
High: Use this setting when using the projector at an altitude of 

1,500 m or higher.

Standard: Use this setting when using the projector at normal 

altitudes.

When this item is set to “High”, the fan noise becomes slightly 
louder since the number of  fan rotation increases.

Lowers the power consumption in standby.
When set to “Standard” the power consumption in standby becomes 
normal.
When set to “Low”, the power consumption in standby mode is 
lowered.

Sets the power saving mode.
When set to “On”, the projector goes into power saving mode if no 
signal is input for 10 minutes. At that time, after the 

?

/

1

 (On/

standby) indicator flashes, it will light in orange and the screen 
becomes dark. In power saving mode, the power saving mode is 
cancelled if a signal is input or any button is pressed. If you do not 
want to set the projector to power saving mode, select “Off”.