Sony VPL-FX50 Manual Do Utilizador

16

 (GB)

This projector is compatible with networking.
Installing a wireless LAN PC card or using the
ETHER connector enables you to connect the
projector to a wireless or wired LAN. You can also
install a PC memory card.
This section describes how to connect to LAN and
how to install a PC card.
Whenever you connect the projector to LAN, set
INPUT C FUNC. in the INSTALL SETTING menu
to ON.

When you use a wireless LAN PC card or memory
card, insert the card into the INPUT C PC CARD
slot.

To remove the PC card from the slot, press the eject
button.

INPUT A

R/R-Y/P

R

INPUT B
RGB (DVI)

INPUT C
ETHER

B/B-Y/P

B

G/Y

SYNC/HD

MONITOR OUT

VIDEO IN

VIDEO OUT

S VIDEO

VIDEO

TRIG

RS-232C

PLUG IN POWER

CONTROL S

VD

This section describes how to connect the projector
with a 15k RGB/component equipment.
Also refer to the instruction manuals of the equipment
to be connected.

Connecting

• Set the aspect ratio using ASPECT in the INPUT

SETTING menu according to the input signal.

• Select the input signal using INPUT-A in the SET

SETTING menu.

• Use the composite sync signal when you input the

external sync signal from 15k RGB/component
equipment.
Connecting to a HDTV 1035/60i
Since the screen ratio of a high definition image is
16:9 and 576 lines are displayed in the vertical
direction, the image displayed is not a high-
definition image.

Front of the projector

to RGB/component
output

15k RGB/component equipment

Open the lid of the slot, then insert the PC card
to the INPUT C PC CARD slot

PC card

Insert the card
with the arrow
mark facing
toward the slot.

The eject button pops out
when inserting.

Monitor cable
(not supplied)