Viewsonic PJ1172 Manual Do Utilizador

With the SCREEN menu, the items shown in the table below can 

be performed. Perform each operation in accordance with the 

instructions in the table below.

(This table is continued to the following page.)

Item

Description

BLANK

Select a type of BLANK screen using the S/T buttons.:

     MyScreen  ORIGINAL  BLUE  WHITE  BLACK
The BLANK screen is displayed by pressing a button.
The MyScreen is the screen you can register a desired screen, and 

the ORIGINAL is the existing standard screen. The BLUE, the WHITE 

and the BLACK are the non-pattered (plain) screens in each color.

To avoid remaining as an afterimage, the MyScreen and the 

ORIGINAL screens will change to the BLACK screen after several 

minutes.

For the MyScreen, please refer to the item “MyScreen” in this 

table.

START UP

Select a type of START UP screen using the S/T buttons.:

    MyScreen  ORIGINAL  TURN OFF
The START UP screen is the screen, which is displayed when no 

signal or an unsuitable signal is detected.
The MyScreen is the screen you can register a desired screen, and 

the ORIGINAL is the existing standard screen. When TURN OFF is 

selected, the BLUE is used.

To avoid remaining as an afterimage, the MyScreen and the 

ORIGINAL screens will change to BLANK after several minutes. If 

also the BLANK screen is the MyScreen or the ORIGINAL, it will 

change to the BLACK screen.

About the MyScreen, please refer to the item “MyScreen” in this 

table. About the BLUE, BLACK and BLANK screens, please refer to 

the item “BLANK” in this table.

MyScreen

Pressing the X (or the ENTER) button starts the MyScreen 

registration. Please see the flow chart on the following page.

MyScreen SIZE

Select the size of the MyScreen using the S/T buttons.: 

    x1  FULL

MyScreen LOCK

Select TURN ON or TURN OFF using the S/T buttons.:

    TURN ON  TURN OFF
The TURN ON disables the operation of the item “MyScreen” of this 

SCREEN menu.

MENU POSITION Adjust the menu position using the S/T/W/X buttons.:

    

              Up

                  

      Left  



 +     Right

                

               Down

To finish this operation, press the ESC button but not the W 

button.