Epson EB-G5650W Manual Do Utilizador

Sub Menu

Function

DHCP

You can set whether or not (On/Off) to use DHCP

.

If this is set to On you cannot set any more addresses.

IP Address

You can input the IP address

 assigned to the projector.

You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

Subnet Mask

You can input the Subnet Mask

 for the projector. You can input a number from 0 to 255 in each field of the address. However, the following subnet

masks cannot be used.
0.0.0.0, 255.255.255.255

Gateway Address

You can input the IP address for the gateway for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following Gateway addresses

 cannot be used.

0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

MAC Address

Displays the MAC address.

IP Address Display

To prevent the IP address from being displayed on the LAN Standby screen, set this to Off.