Epson EB-Z9870U Manual Do Utilizador

Settable  items  vary  depending  on  the  image  signal  and  source  currently
being  projected.  Setting  details  are  saved  for  each  image  signal.

Submenu

Function

3D Setup

When projecting passive 3D images using two projectors, set 3D
Images

 to On.

Auto Setup

(Only available when an analog RGB computer signal is being
input.)
Set to On to automatically adjust Tracking, Sync., and Position to
the optimum state when the input signal changes.

Submenu

Function

Resolution

(Only available when an analog RGB computer signal is being
input.)
Set to Auto to automatically identify the resolution of the input
signal. If images are not projected correctly when set to Auto, for
example if some of the image is missing, set to Wide for wide
screens, or set to Normal for 4:3 or 5:4 screens depending on the
connected computer.
Manual

 allows you to specify the resolution. This is ideal when

the connected computer is always the same.

Tracking

(Only available when an analog RGB computer signal is being
input.)
You can adjust computer images when vertical stripes appear in
the images.

Sync.

(Only available when an analog RGB computer signal is being
input.)
You can adjust computer images when flickering, fuzziness, or
interference appears in the images.

Position

You can adjust the display position up, down, left, and right when
a part of the image is missing so that the whole image is projected.

Progressive

Interlace

 (i) signal is converted to Progressive

 (p). (IP

conversion)
Off

: Ideal for images with a large amount of movement.

: Ideal for general video images.

: This is ideal for movie films, computer graphics, and

animation.

Frame Interpola‐
tion
(EB-Z10005U/
EB-Z10000U/
EB-Z9875U/
EB-Z9870U/
EB-Z9750U only)

You can play fast moving images smoothly by producing
intermediate frames between the original frames.