Epson EB-Z9870U Manual Do Utilizador
b
Adjust the position of the projected image in the following order
(starting from the adjustments that have larger corrections).
(starting from the adjustments that have larger corrections).
(1)
Projector's position (angle)
s
(2)
Lens shift/Zoom
s
s
(3)
Correct the four image corners
s
(4)
Correct the slight position misalignment that occurs when matching the
projected images.
projected images.
s
c
Set the Color Mode to Multi-Projection with the [Color Mode]
button.
button.
a
• You can also set from Color Mode in Multi-Projection.
s
Extended - Multi-Projection - Color Mode
• When projecting 3D images, set it to 3D Multi-Projection.
d
Adjusts the color tone for the whole screen as necessary.
s
Edge Blending
Follow the steps below to adjust the overlapping areas of the images.
(1)
Fine tune the overlapping areas to make seamless screen.
s
(2)
Adjust the brightness difference for each projector lamp.
s
(3)
Adjust the color balance of the projected images.
s
Adjust the overlapping area of the images (Edge Blending)
You can fine tune the overlapping areas to make seamless screen.
a
Press the [Menu] button while projecting.
s
b
Select Multi-Projection from Extended.
Multi-Projection Function
81