EIKI LC-WUL100L Manual Do Utilizador

Remote Control

POINT

▲▼◄►

buttons

KEySTONE button

Basic Operation

If a projected picture still has keystone distortion after

pressing the AUTO PC button on the remote control,

correct the image manually as follows:

Press the KEYSTONE button on the remote control to

switch the Standard (for Vertical/Horizontal) /Corner

correction adjustment. The Standard or Corner correction

adjustment dialog box appears. Use the Point ▲▼◄►

buttons to correct the Standard or Corner distortion. The

Standard or Corner correction adjustment can be stored

(see pages 44, 50).



Note:

• The white arrows indicate that there is no

correction.

• A red arrow indicates the direction of

correction.

• An arrow disappears at the maximum

correction.

• If you press and hold the KEYSTONE

button for more than 3 seconds while

the Standard or Corner correction dialog

box is being displayed, the Standard

or Corner correction adjustment will be

released.

• The Corner pattern can be set to

Off,

Red, White or Blue in the Corner pattern

function. See "Keystone" on pages 44,

50.

• The adjustable range is limited depending

on the input signal.

• Standard and Corner correction functions

cannot be adjusted at the same time. If

one of the functions is adjusted, and then

the other one will be reset automatically.

Reduce the top left corner

part with the Point ►▼

buttons.

Keystone

Reduce the top right corner

part with the Point ◄▼

buttons.

Keystone

Reduce the bottom left

corner part with the Point

►▲ buttons.

Reduce the bottom right

corner part with the Point

◄▲ buttons.

Press the KEYSTONE button on the remote control

to switch Corner correction adjustment, press the

SELECT button on the remote control to select the

corner you want to adjust.

Reduce the right part

with Point ► button.

Reduce the upper width

with the Point ▲ button.

Reduce the left part

with Point ◄ button.

Reduce the lower width

with the Point ▼ button.

Press the

SELECT

button

Press the

SELECT

button

Press the

SELECT

button

Press the

SELECT

button

Keystone

The top left corner adjustment as an

example:

Press the

Point ▼

button

Press the Point

► button

Keystone Correction

Standard

Corner correction

Keystone