EIKI LC-WUL100L Manual Do Utilizador

PC system can also be selected manually.

The PC System Menu  

Selected system is    

displayed.

Press the MENU button to display the On-Screen 

Menu. Use the Point ▲▼ buttons to select 

Input 

and then press the Point ► or the SELECT button. 
Use the Point ▲▼ buttons to select 

System and 

then press the Point ► or the SELECT button.

Use the Point ▲▼ buttons to select the desired 

system and then press the SELECT button.

Systems in this dialog 

box can be selected.

Customized 

Mode (1-10) 

set in the PC adjust Menu 

(pp.38-39).

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC 

adjustment. If a computer is selected as a signal source, this projector automatically detects the signal 

format and tunes to project a proper image without any additional settings. (Signal formats provided in this 

projector are shown on pages 82-83)

One of the following messages may appear when:

When the projector cannot recognize the 

connected signal conforming to the provided 

PC Systems, 

Auto is displayed on the System 

Menu box and the Auto PC adjustment function 

works to display proper images. If the image is 

not projected properly, a manual adjustment is 

required (pp. 38-39).

There is no signal input from the computer. 

Check the connection between your computer 

and the projector. (See “Troubleshooting” on 

pp. 73-75.)

The preset system is manually adjusted in the 

PC adjust Menu. The adjusted data can be 

stored in

 Mode 1-10 (pp.38-39).

PC Systems provided in this projector is 

chosen.  The projector chooses a proper system 

provided in the projector and displays it.  

*

Mode 1 and SVGA 1 are examples.  

36