EIKI LC-WUL100L Manual Do Utilizador

Select the desired screen size that conforms to the input 

signal source.

Provide the image within a screen size keeping its original 

aspect ratio.



Press the MENU button to display the On-Screen 

Menu. Use the Point ▲▼ buttons to select 

Screen 

and then press the Point ► or the SELECT button.

Use the Point ▲▼ buttons select the desired item 

and then press the SELECT button.

To reset the adjusted data, select 

Reset and press the 

SELECT button. A confirmation box appears and then 

select 

yes. All adjustments will return to their previous 

figures. 

To store the adjusted data, select 

Store and press the 

Point ► or the SELECT button. Use the Point ▲▼ buttons 

to select one from Image 1 to 10 and press the SELECT 

button. 

A confirmation box appears and then select 

yes. Stored 

data can be called up by selecting an 

Image (1-10) in the 

Image Mode Selection on page 40.

A confirmation box appears 

and then select 

yes.

Provide the image in its original size. When the original 

image size is larger than the screen size (1920 x 1200), 

the projector goes to the panning mode automatically. 

Use the Point ▲▼◄► buttons to pan the image. When 

adjusted, the arrows will turn red. When reaching to the 

correction limits, the arrows will disappear.

Scale the image proportionally to fit the entire screen. 

Either side of image may go over the screen.

Provide the image to fit full screen size.

Provide the last stored aspect screen image. 

Provide the image at the 16:9 wide screen ratio.

42