Garmin 74C Manual Do Utilizador
Fine-tuning the Projector
59
Setting a Password
1. Press the
Freeze
button on the remote control for about 7
seconds, until you see the Password Protect menu:
2. Select
Password
and press
Enter
. You see the message
Change
the password?
3. Select
Yes
and press
Enter
.
4. Enter a 4-digit password using the numeric keypad on the remote
control.
The password will be displayed as
****
. After you enter the last
digit, a confirmation screen appears. Enter the password again.
5. After you finish setting the password, press the
Esc
button to
return to the Password Protect menu.
Make a note of the password and keep it in a safe place in case you
forget it.
forget it.
Turning On the Password and User’s Logo
1. To enable the password, select
Power ON Protect
and press
Enter
. Select
ON
then press
Esc
.
2. If you want to disable the password temporarily, select
Timer
and
press
Enter
. Then use the numeric keypad to enter the number of
hours (from 0 to 999) that you want the password feature
disabled. If you want the projector to request the password every
time it is turned on, set the timer to
disabled. If you want the projector to request the password every
time it is turned on, set the timer to
0H
.
The countdown for the elapsed time begins as soon as you close
the Password Protect menu. (You can check the elapsed time in
this menu next to
the Password Protect menu. (You can check the elapsed time in
this menu next to
Time elapsed
.)
note
If a password has already
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 60.
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 60.
Use these buttons like a
numeric keypad to enter
the password
numeric keypad to enter
the password