Infocus SP8602 Manual Do Utilizador
12
Adjusting the image
Position the projector to the desired distance from the screen at a 90 degree angle to
the screen. See page 8 for a table listing of screen sizes and distances.
the screen. See page 8 for a table listing of screen sizes and distances.
Remove the projector top cover
a. Slide the tabs on the side toward the rear of the projector to unlock the
projector top cover.
projector top cover.
b. Slide the top toward the front of the projector to unhook it from the projector
body.
body.
c. Lift off.
Adjust the zoom or focus.
If the image is square but not centered on the screen or viewing area, adjust it by
using the lens shift dials. See page 7 for details.
using the lens shift dials. See page 7 for details.
Rotate the elevator feet for granular adjustment of the projector’s height. Avoid
placing your hands near the hot exhaust vent at the side of the projector.
placing your hands near the hot exhaust vent at the side of the projector.
Adjust the Contrast or Brightness in the Basic Picture menu. See page 27 for help
with these menu adjustments.
with these menu adjustments.
Adjust distance
Remove cover
horizontal
vertical
zoom
focus
(a)
(b)
(c)
(a)
horizontal
vertical
zoom
focus
Adjust zoom, focus and lens
shift
shift
Adjust height
Release button
Elevator foot