Casio pmn Manual Do Utilizador

The projector does not 
project any image from the 
connected device.

The connected computer or video device may not 
be turned on, or it may not be outputting a video 
signal.
J Make sure the connected computer or video 

device is turned on, and perform the required 
operation on it to output a video signal.

—

The correct output source is not selected on the 
projector.
J On the projector, select the input source that 

corresponds to the device whose image you 
are trying to project.

page 6

The projector does not 
correctly project the image 
from the connected device.

Images may not project correctly when you have 
the component output terminal of a video device 
connected to the RGB terminal of the projector. 
J Try using the projector’s VIDEO input terminal 

or S-VIDEO input terminal (see “Connecting to 
a Standard Video Device”).

User’s 

Guide 

(Basic 

Operation)

Images sent from a computer over an RGB cable 
may not project correctly if [Component] is 
selected for the “Input Settings 

J RGB Input” 

menu setting. 
J Turn off the projector and disconnect the AC 

cord and RGB cable. Next, reconnect the AC 
cord only and turn on power. Change the 
“Input Settings 

J RGB Input” menu setting to 

[RGB]. Try projecting again.

page 42

When RGB/Component is 
selected as the input 
source, the color of the 
projected image or the 
image itself is abnormal. 

The settings configured on the setup menu’s 
“Input Settings 

J RGB Input” menu may not be 

compatible with the device connected to the RGB 
input terminal.
J Use the setup menu to configure the “Input 

Settings 

J RGB Input” menu settings to correct 

the problem. 

page 42

The projector keys to not 
work.

Key lock or power on password may be turned 
on.
J Turn off key lock and/or power on password.

page 47