Boxlight CP755ew Manual Do Utilizador

Multimedia LCD Projector

Turning off the projector

1. Press the power button on the projector or r emote control. The power off

confirmation message appears .I f you do not wan t to power off the
projector, ignore the message and it will disappear.

2. Press the power button again and the projector will enter cool-down

mode. The lamp shuts off, the lamp indicator flashes red, and the fans

continue to run for approximately two minutes. During the cool down

sequence the projector will not respond to any control panel or remote

control buttons.

Caution: Do not set the power switch to off or unplug the projector during the

cool-down sequence. Not allowing the lamp to cool properly will greatly reduce the

life of the lamp.

3. After the cool-down sequence is complete the fans will shut off and the

lamp indicator will stop flashing. The projector is now in standby mode

and can be turned back on with the remote control or control panel. If the

projector will not be used for an extended period, set the power switch to

off and disconnect the power cord.

-32-