Pitney Bowes DM300c Manual Do Utilizador

1.  Line up the yellow tab with the yellow slot.
2.  Slide the moistener tank into position on the mailing machine 

base until the release lever snaps into position. See the figure at 

right.

3.  Resume operation.

4.  Place the wick back into the shield.
5.  Reinstall the wick and holder assembly into the moistener.
6.  Reinstall the moistener. Push down on the blue release lever on 

the moistener. 

1.  Remove the moistener 

as described on page 

 

7-10.

2.  Pull up and remove 

the shield and wick 

from the moistener 

tank.

3.  Separate wick from 

the shield. Clean the 

wick in plain water, 

and rinse thoroughly.

7.  Separate wick from the shield. Clean the wick in plain water, and 

rinse thoroughly.