Toshiba B-EV4 Manual Do Utilizador
6. SYSTEM MODE
EO18-33025
(Revision Date: Mar. 27, 2009)
6.4 SENSOR ADJUSTMENT
6-3
6.4 SENSOR ADJUSTMENT
Adjust the sensor to the proper position and set the label or tag paper.
When the STATUS lamp lights in red during the system mode, releasing the [FEED] button performs an
auto sensor adjustment and measurement of the label length.
For the details of the sensor adjustment, refer to the Owner’s Manual.
When the STATUS lamp lights in red during the system mode, releasing the [FEED] button performs an
auto sensor adjustment and measurement of the label length.
For the details of the sensor adjustment, refer to the Owner’s Manual.
6.5 DIAGNOSTIC TEST PRINT/DUMP MODE
When the STATUS lamp lights in green during the system mode, releasing the [FEED] button makes a
Diagnostic Test Print and the printer goes into the dump mode.
Diagnostic Test Print and the printer goes into the dump mode.
PRINTER INFO.
PROGRAM VERSION
PROGRAM VERSION
V1.0C 0A9D
TONE ADJUST
+00
FEED ADJUST
+0.0mm
CUT POSITION ADJUST
+0.0mm
BACKFEED ADJUST
+0.0mm
PARAMETER
[ PC-850 ] [ 0 ]
[ 9600 ] [ 8 ] [ 1 ] [ NONE ] [ 2 ]
[ ON ] [ AUTO ] [ FEED ] [ B0 ]
X-COORDINATE ADJUST
+0.0mm
SENSOR SELECTION
TRANSMISSIVE
SENSOR ADJ. VALUE
TRANSMISSIVE [19] REFLECTIVE [47]
PRINT SPEED
5 IPS
FLASH ROM
4 MB
SDRAM 8
MB
USER MEMORY
[ 704 KB][ 0 KB]
TTF AREA
[ 0 KB][ 0 KB]
EXT CHAR AREA
[ 0 KB][ 0 KB]
BASIC AREA
[ 0 KB][ 0 KB]
PC SAVE AREA
[ 704 KB][ 0 KB]
INFORMATION B-EV4-Gx-QM
00000000001
TOTAL FEED
0.0 km
TOTAL PRINT
0.0 km
TOTAL CUT
0
IP ADDRESS
192.168.10.20
SUBNET MASK
255.255.255.0
GATEWAY 0.0.0.0
MAC ADDRESS
MAC ADDRESS
00-1B-82-FF-0C-E8
DHCP Disabled
DHCP CLIENT ID
DHCP CLIENT ID
FFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFF
SOCKET COMM.
SOCKET COMM.
Enabled
SOCKET COMM. PORT
8000
Test Print Sample