Ultra electronic Latin Series Manual Do Utilizador

3506/07/01 Issue 1                            LATIN SERIES                        DCR No. 26759 
                        PRINTHEAD INSTALLATION & COMMISIONING 

 
 
Removal of the Unserviceable Printhead 
 
1.  Ensure that the printer is switched off and disconnected from the mains 
      supply. 
 
2.  Release the door catch and lift open the door assembly. 
 
3.   Locate and release the Quick Release Fastener on the Print head 
Assembly. 
 
3.  Gently lift the printhead assembly forwards and downwards away from the 

lid 

      assembly. 
 
4.  Disconnect the electrical connector from the printhead. 
 
Installing the Replacement Printhead 
 
1.  Ensure the printer is switched off and disconnected from the mains supply. 
 
2.  Locate the lugs on the printhead assembly in the cutaway receptacles on 

the 

      lid assembly. Gently move the printhead upwards and backwards into 
      position. 
 
3.  Secure the Quick Release Fastener attaching the Printhead to the lid. 
 
4.   Reconnect the electrical connector to the printhead. 
 
 
Your printhead is now fitted. To complete the set up please turn to the 
next page.