Toshiba 3511 Manual Do Utilizador

e-STUDIO3511/4511  FIRMWARE UPDATING

6 - 20

November 2003  ©  TOSHIBA TEC

The download jig (PWA-DWNLD-350-JIG) differs from the existing jigs in that the Flash ROM is mounted

on the board of the jig directly. The ROM writer adapter (PWA-DL-ADP-350) is required to write data to

these Flash ROMs. Connect the download jig with the ROM writer via ROM writer adapter to write data.

For the procedure to write data, refer to the download procedure, instruction manual of each ROM writer,

or others.

There are two types of the ROM writer adapter. Use the proper one according to the ROM writer to be

used. Applicable type of the adapter for the ROM writer can be confirmed by the model name indicated on

the board. Confirm that the adapter is available for the ROM writer to be used before connecting them. If

an unapplied adapter is connected, the application of the ROM writer judges it as an error and writing the

data cannot be implemented. Applicable combinations of the ROM writer and adapter are as follows.

ROM writer

Minato Electronics MODEL 1881XP

(or equivalent)

Minato Electronics MODEL 1893/1895/1931/1940

(or equivalent)

ROM writer adapter

PWA-DL-ADP-350-1881

(model 1881)

PWA-DL-ADP-350-1931

(model 1931)

model   1931

( LV650)

model   1881

model   1931

( LV650)

model   1881

PC

Download jig
(PWA-DWNLD-350-JIG)

ROM writer adapter
(PWA-DL-ADP-350)

ROM writer