Toshiba 3511 Manual Do Utilizador

November 2003  ©  TOSHIBA TEC

6 - 47

e-STUDIO3511/4511  FIRMWARE UPDATING

Data file name

1, 2, 3 ... n

* The file name should be consecutive numbers from 1

to “n” without file extension. The capacity of each file

is approx. 8 MB. However, the file capacity of “n” (last

number) may be less than 8 MB.

sysfirm.bin, ROM.bin

ROM.bin

Stored

Hard disk

System control PC board

(SYS board)

Logic PC board

(LGC board)

Scanning section control PC board

(SLG board)

NIC board

In this equipment, it is feasible to update the firmware by connecting the USB storage device on which

the firmware data is written to the USB connector mounted on the system control PC board and turning

ON the power.

The type of firmware to be updated can be selected on the LCD screen in this method. This allows to

update only the necessary firmware individually or to update all firmware in a batch.

The type of firmware which can be updated with this method are as follows in the table below. Also, the

data file of each firmware can be used commonly in the updating methods with USB storage device and

Download jig.

Firmware

Master data

System ROM

Engine ROM

Scanner ROM

NIC ROM