Tally Genicom 5040 Manual Do Utilizador
Menu
User guide
46
Calling up the menu
You can access the menu in the following way:
Make sure that the printer is switched off.
Hold the USER key pressed and power on the
printer by pressing the ON/OFF key.
Hold the USER key pressed and power on the
printer by pressing the ON/OFF key.
The printer initializes and in the LCD display
appears the message:
appears the message:
Menu configurations
(User 1/User 2)
(User 1/User 2)
Every printer is shipped with factory default settings. Basic settings
such as emulation, character pitch, form length etc., which many appli-
cations make use of, are set. At the end of this chapter you will find a
menu printout (status page) (
such as emulation, character pitch, form length etc., which many appli-
cations make use of, are set. At the end of this chapter you will find a
menu printout (status page) (
shows you the printer’s default settings.
Your printer allows you to set and use two independent menu config-
urations (User 1 and User 2). If one of your applications for example
requires an IBM printer while another program works better with an
EPSON printer, you can set an IBM emulation configuration with the
desired settings, and set the second configuration as an EPSON emu-
lation.
Your printer allows you to set and use two independent menu config-
urations (User 1 and User 2). If one of your applications for example
requires an IBM printer while another program works better with an
EPSON printer, you can set an IBM emulation configuration with the
desired settings, and set the second configuration as an EPSON emu-
lation.
The USER key allows you to change from
User 1 to User 2 and vice versa during opera-
tion.
User 1 to User 2 and vice versa during opera-
tion.
EJECT
USER
SET UP
1
2
STOP
EJECT
USER
SET UP
1
2
STOP
MENU
USER
EJECT
USER
SET UP
1
2
STOP
ONLINE
PAPER