Canon DS700 Manual Do Utilizador

Troubleshooting

When a printer error occurs, the POWER lamp flashes. The number of flashes 
indicates the type of error that has occurred. Count the flashes and take the 
appropriate action to correct the error.

Two flashes

Printer is out of 
paper

Reload paper and press the RESUME/CANCEL button.

Three flashes Paper jam

If a paper jam occurs, clear the jammed paper; reload 
paper in the printer, then press the RESUME/CANCEL 
button.
See “Paper Jams” on page 68.

Five flashes

Print head not 
installed/Defective 
print head

Install print head.
See “Installing the Print Head” on page 5.
If the print head is already installed, press the POWER 
button to turn off the printer, and press the POWER 
button again to turn on the printer. If the same error 
occurs, the print head may be defective. Contact a 
Canon service representative.

Eight flashes Waste ink absorber* 

almost full

The printer has a built-in waste ink absorber to hold the 
ink consumed during print head cleaning. Eight flashes 
indicate that this absorber is nearly full. Press the 
RESUME/CANCEL button to clear the error so printing 
can continue.
Contact a Canon service representative.

Nine flashes

A specified period of 
time has lapsed 
without receiving a 
response from the 
digital camera/The 
digital camera 
connected is not 
compatible with this 
printer

Disconnect the camera cable, press the printer’s 
RESUME/CANCEL button and reconnect the cable.
If the error is still unresolved, there is a possibility that 
you are using a digital camera or digital video 
camcorder that is not supported by this printer. Use 
digital cameras or video camcorders that are 
compatible with this printer.

Twelve 
flashes

Ink tank is not 
installed

If an ink tank is not installed, install it. If an ink tank is 
installed, push the PUSH mark on the ink tank to ensure 
it has snapped firmly into place.