Canon LBP3000 Manual Do Utilizador

Installation Problems

T

roub

leshooting

When you install the printer driver from CD-ROM, the printer is not automatically detected 
even when it is turned on.

Cause 1

The USB cable has already been connected and the printer is turned on before 
installing the printer driver.

Remedy

Turn the printer off then turn it back on again.

Cause 2

The printer is turned off.

Remedy

Turn the printer on.

Cause 3

The USB cable is not connected properly.

Remedy

Make sure that the printer and computer are connected properly with the USB 
cable.

Cause 4

An inappropriate USB cable is being used.

Remedy

Use a USB cable that matches the USB interface on the printer. The USB 
interface on this printer is USB 2.0 High-Speed (Windows 2000/XP/Server 
2003/Vista only), USB Full-Speed (USB 1.1 equivalent).

Cause 5

You cannot install from CD-ROM Setup.

Remedy

Install using Plug and Play. (See "For Windows 98/Me," on p. 3-12, p. 3-21 or p. 
3-28)

You cannot find the print server to connect to.

Cause 1

The print server has not been started up.

Remedy

Start up the print server.

Cause 2

The printer is not configured as a shared printer.

Remedy

Configure the printer as a shared printer using the [Printer Properties] dialog 
box on the print server.

Cause 3

You do not have permissions to access the print server or printer.

Remedy

Ask your network administrator to change the user permissions.