Canon W6400 Manual Do Utilizador

Página de 404
3- 77
‹
Printing from Macintosh
Printing Photos and Illustrations without 
Borders (Borderless Printing)
Normally a printed document has white space around its 
edges (margins), but a borderless print for a photograph or 
created image has no white space at its borders; its entire 
surface is covered by printing. 
„
Settings Required for Borderless Printing
Before performing the print job, make sure that a media 
that can be used for borderless printing is loaded. Only 
media fed from the roll can be used for borderless print-
ing on this printer.
Here is a list of the types of roll media and their widths 
that can be used for borderless printing.
Important
z
Paper of types and roll widths other than those listed 
above cannot be used for borderless printing. 
z
The following types of media cannot be cut and are 
printed left to right during borderless printing.
Fine Art Photo, Fine Art Heavyweight Photo, Fine Art 
Textured, Canvas Matte
When you perform borderless printing, be sure to select 
Enlarged/Reduced Printing on the Finishing panel 
(Page Setup for OS 8/9). This allows Borderless Print-
ing
 to be performed.
Important
z
Borderless Printing cannot be performed under the 
following conditions.
Paper Type
Corresponding Roll Width
Heavyweight Coated Paper, 
Premium Matte Paper, Extra 
Heavyweight Coated Paper, 
Glossy Photo Paper, SemiGlos 
Photo Paper, Heavyweight 
Glossy Photo Paper, 
Heavyweight SemiGlos Photo, 
Flame Resistant-Cloth, Fine Art 
Photo, Fine Art Heavyweight 
Photo, Fine Art Textured, 
Canvas SemiGlos, Special 1-5
10-in. Roll (254.0mm)
14-in. Roll (355.6mm)
16-in Roll (355.6 mm)
24-in. Roll (609.6mm)
JIS B2/B3 Roll (515.0 mm)
ISO A1/A2 Roll (594.0 mm)
When Cut Sheet is selected under Media Source on 
the Finishing panel.
When Roll Paper (Banner Printing) is selected 
under Media Source on the Finishing panel.
When Scaling is selected for Enlarged/Reduced 
Printing.
When Rotate Page 90 degrees (Conserve Paper) is 
selected on the Finishing panel.
When several pages are selected for Pages per 
Sheet (Page Layout for OS 8/9) on the Layout 
panel (Page Setup for OS 8/9).
When Print Centered is selected on the Finishing 
panel
When the setting selected for Roll Paper Width does 
not support borderless printing