Canon W6400 Manual Do Utilizador
5- 38
NetWare Settings (Windows)
Setting Up the Print Server With
NWADMIN, PCONSOLE
NWADMIN, PCONSOLE
z
If You Are Using NDS Queue Server Mode or
Remote Printer Mode
Remote Printer Mode
1
Log into NetWare as the System
Administrator, or as a user with equivalent
access rights, then start NWADMIN.
Administrator, or as a user with equivalent
access rights, then start NWADMIN.
2
Execute the Quick Setup.
Select Print Services Quick Setup from the
Tools menu.
Tools menu.
Enter a Print Server Name of your choice. If you
want to use an existing server, click the button to
the right of the name to select it from the list.
want to use an existing server, click the button to
the right of the name to select it from the list.
For the printer Name enter the desired name.
If you intend to use Queue Server Mode, select
Other/Unknown for the Type. If you intend to use
the Remote Printer Mode, select Parallel for
Type, click the Communicate button then select
LPT1 for Port and Manual Load for Connection
Type.
Other/Unknown for the Type. If you intend to use
the Remote Printer Mode, select Parallel for
Type, click the Communicate button then select
LPT1 for Port and Manual Load for Connection
Type.
For the print queue Name enter the desired name.
For Volume enter the volume object to create the
queue (the object that appears as the physical
volume on the network). Click the button on the
right to select from the list.
queue (the object that appears as the physical
volume on the network). Click the button on the
right to select from the list.
Perform any other settings that are required, then
click the OK button.
click the OK button.
Note
z
You are going to need the name of the print server to
perform the printer protocol settings so be sure to note
the printer name.
perform the printer protocol settings so be sure to note
the printer name.
z
When you perform the Quick Setup, “0” is assigned to
the printer as its number. If you intend to use the
Queue Server Mode, do not change the printer
number.
the printer as its number. If you intend to use the
Queue Server Mode, do not change the printer
number.
3
Set the password.
, then
right-click Details.
Click the Change Password button to open the
password entry screen, then enter the desired
password.
password entry screen, then enter the desired
password.
Click the OK button to close the password entry
screen.
screen.
Click the OK or Cancel button to close the
Details screen.
Details screen.
4
Follow the procedure below to start the print
server when you use the Remote Printer
Mode.
server when you use the Remote Printer
Mode.
To use the NetWare file server as the print
server, on the file server enter LOAD
PSERVER.NLM then press the Enter key.
server, on the file server enter LOAD
PSERVER.NLM then press the Enter key.