Canon W6400 Manual Do Utilizador

5- 45

‹

Printing with UNIX

Printing with UNIX

Using LPD to Print

This section describes printing with LPD.

1

Log into the root of the work station.

2

Set up the spooling system.

z

Example Using Solaris 9: 

Start the Admintool utility. 

Select Browse > Printers. 

Select Edit > Add > Access to Printer. 

Following the format restrictions, enter the 
Printer Name and Print Server name. 

Press the OK button.

z

Example Using Red Hat Linux

Start the Printer Configuration utility on the 
control panel. 

Select Add > Other UNIX (lpd) queue > OK. 

For the Printer Name, Remote Host, Remote 
Queue enter the desired print queue name, 
printer IP address or name, and lp. 

If a filter is to be used, select the filter.

If there is no filter for the printer, you can temporarily 
select any filter, shut down the Printer Configuration 
Utility, and then change the postscript.cfg file in the 
spool directory so it matches your printer. For more 
details, please refer to the Ghostscript descriptions.

Note

z

The Admintool Utility is provided with the operating 
system. For more details about how to use this utility, 
please refer to the operating system instructions.

z

The setting procedure above is an example. The 
procedure may be different in the environment that you 
are using. 

z

This completes the printing settings.