Canon W6400 Manual Do Utilizador

6- 31

‹

Unexpected Printing Results

Abnormal Content

Broken lines are visible.

Problem1:

The printhead has not been aligned correctly.

Solution1: Use the printer operation panel to align the 

printhead. (

→ 

Problem2:

After switching the black ink type, the position of 
the printhead occasionally slips.

Solution1: Align the printhead.

Random, bizarre characters are printing.

Problem1:

Data from the print job data stream has been 
lost.

Solution1: Switch the printer and computer off, then switch 

them on again and start the print job again.

Problem2:

Another printer driver was selected for the print 
job.

Solution1: Select the correct printer driver for the printer 

and try again. (

→ 

Problem3:

The fonts of the printed data are deranged.

Solution1: Make sure that the software application you are 

using has the correct type of fonts and that they 
have been installed correctly.
(

→ 

Software Application Instructions)

Length for the media feed method is not correct.

Problem1:

Band Joint is selected.

Solution1: If you want to match size the media feed 

direction correctly, select Print Length for the 
Feed Priority item, then enter the setting for the 
Adjust Length. The amount of media feed can 
be adjusted in 0.02% increments. 

Printing in Monochrome

Problem1:

The printer driver's Color Mode is set to 
Monochrome (Photo), Monochrome, or Black 
Only.

Solution1: Select Color for the Color Mode in the printer 

driver and try again.
(

→ 

Printer Driver Online Help)

Problem2:

Color ink tank nozzle is clogged.

Solution1: Print a nozzle check pattern to confirm the 

condition of the printhead. If a print head nozzle 
is blocked, perform the printhead cleaning 
procedure. (

→ 

, 

)