Canon iR 2570Ci Manual Do Utilizador

Periodic Inspection of the Breaker

xxiii

Periodic Inspection of the Breaker

This machine has a breaker that detects excess current or leakage current. Be sure to test the
breaker once or twice a month using the following procedure.

IMPORTANT

• Make sure that the main power is turned ON, and the machine is neither printing nor scanning before

inspecting the breaker.

• If a malfunction occurs after an inspection, contact your local authorized Canon dealer.
• Before the main power is turned OFF, make sure that you wait for at least 30 seconds after the last

printing process is finished. Otherwise, the next print output may become dirty.

Checking the Breaker

Push the test button with the tip of a ball-point
pen, or similar object.

IMPORTANT

Briefly push the test button.

The breaker lever automatically switches to
the OFF ("

" side) position. Confirm that the

power is cut OFF.

IMPORTANT

• Do not use the test button to turn the power ON and OFF.
• If the breaker lever does not switch to the OFF ("

" side) position, repeat step 1.

• If the breaker lever does not switch to the OFF ("

" side) position, despite carrying out the above

procedure two or three times, contact your local authorized Canon dealer.

• The breaker lever may stop between ON and OFF, depending on the type of breaker.
• When the breaker lever is stopped between ON and OFF, it is in an OFF state.

I side)

(

OFF

side)