Xerox 3315/DN Manual Do Utilizador
System Setup
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
171
Default Paper Size
Use this option to set the default
size of paper.
size of paper.
•
Letter *
•
A4
Power Save
Use this option to set the time
the machine waits before
entering Power Save mode.
the machine waits before
entering Power Save mode.
•
1 min *
•
5 Min
•
10 Min
•
15 Min
•
20 Min
•
30 Min
•
45 Min
•
60 Min
•
120 Min
Wakeup Event
Use this option to determine
what ‘wakes’ the machine up
from Power Save mode.
what ‘wakes’ the machine up
from Power Save mode.
Xerox WorkCentre 3315
•
Button Press On / Off*
•
Scanner
On* / Off
•
Printer
On / Off*
Xerox WorkCentre 3325
•
Button Press On / Off*
•
Scanner
On / Off*
•
Printer
On / Off*
System Timeout
Sets the elapsed time before the
machine reverts to default
settings.
machine reverts to default
settings.
•
15 Sec
•
30 Sec *
•
60 Sec
•
120 Sec
•
180 Sec
Job Timeout
Sets the elapsed time before the
printing the last page of a print
job that does not end with a
command to print the page.
printing the last page of a print
job that does not end with a
command to print the page.
•
(15-300 sec) 15 *
Configuration Page
Enables a report detailing all the
machine settings to be printed.
machine settings to be printed.
•
On *
•
Off
Altitude Adjustment
The xerographic process used in
your machine to make prints is
affected by air pressure. Air
pressure is determined by the
height of the machine above sea
level. The machine will
automatically compensate for
differences in air pressure if you
enable the feature.
your machine to make prints is
affected by air pressure. Air
pressure is determined by the
height of the machine above sea
level. The machine will
automatically compensate for
differences in air pressure if you
enable the feature.
•
Normal *
•
High 1
•
High 2
•
High 3
Auto Continue
Determines whether or not the
machine continues printing
when it detects the paper does
not match the paper settings.
machine continues printing
when it detects the paper does
not match the paper settings.
•
On *
•
Off
Line Termination
Sets the default line termination.
• LF *
• LF+CR
• LF+CR
Option
Description
Settings