Xerox 5400 Manual Do Utilizador

Creating proof jobs without the driver

If the driver does not have a proof job feature, you can create a proof printing job in both 
PCL and PostScript by preceding the job with the following PJL commands:

@PJL XPROOFJOB
@PJL XJOBPASSWORD = number

These commands must be immediately followed by a standard PJL “JOB” command that 
includes the “jobname”.

The job name can be up to 16 alphanumeric characters in the range ASCII 30 through 
ASCII 255, <SP> and <HT>. The password must contain four numeric characters (0-7). If 
there isn’t a job name or there is a syntax error in the job name, the printer assigns a default 
job name. The job name is displayed on the control panel Password menu when you enter 
its associated password. If there isn’t a password or the password contains syntax errors, 
the entire job is printed immediately and is not stored as a proof job.

The following example creates a PCL proof job with the name “Sample” associated with 
password 7777 requesting five collated sets in addition to the proof copy.

<ESC>%-12345X@PJL XPROOFJOB
@PJL XJOBPASSWORD = 7777
@PJL JOB NAME = "Sample"
@PJL ENTER LANGUAGE = PCL
@PJL SET QTY = 5
...PCL file...

<ESC>%-012345X@PJL EOJ
<ESC>%-012345X.

The printer continues processing all data after the @PJL SET QTY = 5 command as part of 
the proof job named “Sample.” The proof job is stored on the hard disk under the name 
“Sample” with a password of "7777" (as defined in the PJL XJOBPASSWORD command). 
The @PJL EOJ command signifies the end of the proof job ends. The “EOJ” command 
should be followed by a UEL.

Deleting secure or proof jobs

You use the Password Menu to print or delete secure or proof jobs. 

1.

On the control panel, press the Menu keys (labeled 1 or 5) to scroll to the 

.

2.

Press the Item keys (labeled 2 or 6) to scroll to the password prompt.

3.

Use the number keys to enter the 4-digit password for the job(s) you want to print 
completely.

4.

Press the Item keys (labeled 2 or 6) to select either 

 or a particular jobs with 

this password.

5.

Press the Value keys (labeled 3 or 7) to select either 

 or 

.

6.

Press the Enter key (labeled 4).

7.

Press the On Line key (labeled 0) to exit the menus.