Xerox 604P18057 Manual Do Utilizador

Print Mode
Specify the PDL (Page Description Language) to be used for print jobs. Only pre-
installed PDLs are available.

PJL
Specify whether to enable the PJL (Printer Job Language).

Auto Eject Time
Specify the time-out period when print data is not sent to the machine sequentially. If 
the specified time elapses, the remaining data inside the machine is automatically 
printed out. You can specify a time within the range of 5–1,275 seconds in 5-second 
increments.

Adobe Communication Protocol
Specify the communication protocol format for Adobe Communication Protocol.

• Standard – Select this option when the communication protocol is in the ASCII 

format.

• Binary – Select this option when the communication protocol is in the binary format. 

Depending on the data, the print job may be completed faster than [Standard].

• TBCP – (Tagged Binary Communications Protocol) Select this option to switch the 

specific control codes when the communication protocols involve both ASCII and 
binary formats.

Bi-directional Communication
Select whether to enable the bi-directional communication.

Input Prime
Select whether to enable the input prime. If enabled, the reset processing is triggered 
by the input prime signal received.

Use this feature to specify whether to enable the USB port and to configure the relative 
parameter settings.

Port Status
Specify whether to enable the USB port.

Print Mode
Specify the PDL to be used for print jobs. Only pre-installed PDLs are available.

PJL
Specify whether to enable the PJL (Printer Job Language).