Citizen Systems CT-S2000DCL Manual Do Utilizador
5.6 Printing Paper
Also refer to the core dimension and notes of “5.2 Printing Paper” in User’s Manual of
standard model. Use print paper shown in the following table or the equivalent.
standard model. Use print paper shown in the following table or the equivalent.
Paper type
Product name
Recommended thermal label paper
GG40/P22/G6B from Ojitac, HD75 from Nippon Paper,
150LA-1 from Ricoh
a) Label paper
D
B
C
A
E
F
H I
J
K
G
Full cut
position
position
Paper feeding
direction
Printable area
CAUTION!
Pay attention to the following when using Auto Cutter. Otherwise, a cutter lock or a cutter
failure may occur.
■ Set the cut length of paper to 25 mm or more.
■ When using label paper, cut the gap between labels (liner sheet). Do not cut the label paper
failure may occur.
■ Set the cut length of paper to 25 mm or more.
■ When using label paper, cut the gap between labels (liner sheet). Do not cut the label paper
(tack paper).
■ Adjusting the paper sensor must be carried when the type of liner is changed.
Mark
Item
Dimensions
A
Liner width
57.5, 59.5, 79.5,
82.5 + 0.5
B
Label width
(Size A) -4 + 0.5
C
Left edge of label
2 + 0.5
D
Print width
(Size A) - 4
E
Top margin
2 + 1
F
Print length
21 to 296
G
Bottom margin
2 + 1
H
Cut position between labels
1/2 x (Size I)
I
Gap between labels
4 to 30
J
Label length
25 to 300
K
Label pitch
I+J
Unit: mm
_
_
_
Black Mark (printed on the reverse)
b) Black mark paper (BM paper)
D
B
C
A
E
F
G
Cut position
Paper feeding
direction
Printable area
Unit: mm
CAUTION!
■ PCS value of black mark must be 0.9 or more.
■ When using the black mark paper, consider the margin of +/- 2 mm for the print position
■ When using the black mark paper, consider the margin of +/- 2 mm for the print position
against the standard position and +/- 5 mm for print length.
■ Refer to the above drawing for the printable area and have enough margings specified in the
marks E and G. If the print data size is out of the printable area, the printer should skip to next
page.
page.
_
Dimensions
BM1
BM2
BM3
A
Right edge of black mark
13.5 or more 57.5 or more 80.5 or more
B
Left edge of black mark
15 or or less
15 oror less 15 or or less
C
Black mark height
5
D
Cut position in black mark
2.5
E
Top margin
6.5
F
Black mark pitch
30 to 300
G
Bottom margin
9
Mark
Item
_
TA74912-00F
1.00E-0710
Printed in Japan