E-Tech WT7900 Manual Do Utilizador

6. Remove the two wing nuts and lock washers securing the printer to the 

stand (underneath the printer). Keep them in a safe place.

7. Lift the printer using the handgrips, two in front and two in back.

8. Keep the printer level while moving it. See page 103 for information 

about setting up the printer after transporting it.

To ship the printer a longer distance, you should repack it using the original 
box and packing materials. If you don’t have the original packaging, you can 
purchase replacement packaging from Epson. See page 10 for more 
information.

When you need to move the printer a short distance, such as within the same 
building, you can roll the printer on its casters. 

1. Press the P power button to turn off the printer.

Wait until the lights on the control panel stop flashing and go out, and 
then unplug the printer. 

2. Disconnect the power cord and interface cable.

3. Remove any paper and close the roll paper cover. Make sure the front 

cover is closed.

4. Remove the film basket as described on page 64.

5. Store the paper basket as described on page 72.

WARNING: The printer is 
very heavy. Make sure you 
have four people lift it.

Caution: Do not roll the 
printer on angled or 
uneven surfaces.