Elo TouchSystems 282P101110000 Manual Do Utilizador

SHOCK HAZARD WARNING:

The printer and power supply should never be operated in a

location where either one can get wet. Personal injury could

result.

MEDIA WARNING:

Always use high quality approved labels, tags and transfer

ribbons. If adhesive backed labels are used that DO NOT lay flat

on the backing liner, the exposed edges may stick to the label

guides and rollers inside the printer, causing the label to peel

off from the liner and jam the printer. Approved supplies can be

ordered from your dealer.

RELOADING HINT:

If you should run out of labels while printing, DO NOT turn the

power switch OFF (0) while reloading or data loss may result.

The printer will automatically a new label roll is loaded.

STATIC DISCHARGE:

The discharge of electrostatic energy that accumulates on the

surface of the human body or other surfaces can damage or

destroy the print head or electronic components used in this

device.

DO NOT TOUCH the print head or the electronic components

under the top cover.

THERMAL PRINTING:

The print head becomes hot while printing. To protect from

damaging the print head and risk of personal injury, avoid

touching the print head. Use only the cleaning pen to perform

maintenance.

980346-001 Rev. A