FARGO electronic HDPii Manual Do Utilizador

RESTRICTED USE ONLY 

 

Fargo Electronics, Inc. 

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 

 

6-11

addr 

Store a new IP 
address. 

store net addr <ADDRESS> 

mask 

Store a new address 
mask. 

store net mask <MASK> 

gateway  Store a new default 

gateway. 

store net gateway <ADDRESS> 

dns 

Store a new DNS 
server address. 

store net dns <ADDRESS> 

domain 

Store a new DNS 
domain suffix. 

store net domain <STRING> 

opts 

Enable or disable 
automatic address 
assignment using 
DHCP. Static (non-
automatic) addresses 
will come from the 
stored or default 
settings, depending on 
the other settings. 

To enable automatic address 
assignment: 

  store net opts dhcp 

To disable automatic address 
assignment: 

  store net opts -dhcp 

net 

from 

Restore the network 
settings from either the 
default settings or the 
current settings. 

store net from default|current 

mode 

Specify the Ethernet 
interface mode as: 
automatic, full or half 
duplex; 10 or 100 mHz. 
(NOTE: 100 mHz. is 
not supported by the 
Printer). 

store ifc mode 
auto|10half|10full|100half|100full 

store 

ifc  

from 

Set the Ethernet mode 
settings from the 
default or current 
settings. 

store ifc from default|current