FARGO electronic HDPii Manual Do Utilizador
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
2-17
Printer Components: Resin Thermal Transfer to USB Interface Port
Component Description
Resin Thermal
Transfer
Transfer
Resin Thermal Transfer is the print method the Printer uses to print
sharp black text and crisp bar codes that can be read by both infrared
and visible-light bar code scanners.
sharp black text and crisp bar codes that can be read by both infrared
and visible-light bar code scanners.
Like dye-sublimation, this process uses the same thermal Printhead
to transfer color to a film from a resin-only Print Ribbon or the resin
black (K) Panel of a full color Print Ribbon.
to transfer color to a film from a resin-only Print Ribbon or the resin
black (K) Panel of a full color Print Ribbon.
The difference, however, is that solid dots of resin-based ink are
transferred and fused to the surface of the film. (Note: This produces
very durable, saturated printing.)
transferred and fused to the surface of the film. (Note: This produces
very durable, saturated printing.)
Card Cartridge
Load blank cards into this Cartridge.
Card Output
Hopper
Hopper
Stores 100 cards.
LCD Display
Displays the current status of the Printer.
Printhead
The component of the Printer that actually does the printing. (Note:
This component is fragile and must not be bumped or touched with
anything other than a cleaning pen.)
This component is fragile and must not be bumped or touched with
anything other than a cleaning pen.)
Softkey Buttons Current function is displayed above the button and will change
depending upon the Printer's mode of operation.
Card Cleaning
Roller
Roller
Automatically cleans cards for higher print quality. (Note: Replace
this Roller after every 1000+ cards or as needed.)
this Roller after every 1000+ cards or as needed.)
Power Port
Connect to the (included) power supply.
USB Interface
Port
Port
Connect to the Windows PC USB cable, LAN Connector.