Ericsson 7700 Manual Do Utilizador

The control panel includes various lights and an LCD display to indicate the 
status of the printer: 

When your paper runs out, ink is low, or a problem occurs, a message 
appears on the LCD display, and the lights on the control panel come on or 
flash. The following table lists the messages in alphabetical order and 
includes an explanation and instructions for correcting the problem.

LCD 
display

power 
light and 
button

Pause/reset 
light and button

Ink 
light

Left arrow or paper 
source button

Paper 
light

Menu button

Paper feed up button

Paper feed down button

OK button

Paper cut 
button

Ink open button

Print head 
cleaning button

Paper release (ePlaten) 
light and button

BORDERLESS ERROR

LOAD A SUPPORTED PAPER 
SIZE OR LOAD PAPER 
CORRECTLY

The borderless setting is 
selected and paper that doesn’t 
support borderless printing is 
loaded.

Press 

 to cancel the print job. Change 

the setting in the printer driver or load 
different paper.

The sheet size is not 
recognized.

Make sure the paper is flat.

Paper is not loaded correctly.

Make sure paper is loaded correctly.

CALL FOR SERVICE

An error has occurred.

The number 3000 indicates that 
the power cord is not 
connected correctly.

Note the error number, then turn the printer 
off. Then check the power cord connection 
at both ends and turn it back on. If the 
message remains after restarting the printer 
several times, contact your service provider 
as described on page 13.

CANNOT OPEN INK COVER

Something is obstructing the 
indicated ink cover.

Remove the obstruction and press the 

 

button again.