Epson Stylus C66 Manual Do Utilizador

Solving Problems

Follow the instructions below to clean the print head:

1. Make sure the printer is turned on but not printing, and the red 

 ink light

is off. 

2. Right-click the 

 printer icon on your taskbar (in the lower right corner of 

your screen). Select 

Head Cleaning

.

Note: 
If you don’t see the printer icon, see page 15 for instructions on making it appear.

3. Follow the instructions on the screen to clean the print head.

Cleaning takes about 40 seconds. The printer makes noise and the green 

power light flashes.

Caution: 
Never turn off the printer while the green 

 

power light is flashing, unless the 

printer hasn’t moved or made noise for more than 5 minutes.

4. When the green 

 power

 

light stops flashing, make sure paper is loaded in 

the printer. Click 

Print nozzle check pattern

, then click 

Print

. 

The nozzle check pattern prints.

5. If the nozzle check pattern has no gaps, click 

Finish

.

If the pattern has gaps, click 

Clean

 to clean the print head again.

You can also turn the printer off and wait overnight—this allows any dried ink 
to soften—and then try cleaning the print head again.