FARGO electronic Pro-LX Laminating Card Printer/Encoder Manual Do Utilizador
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0)
6
Reviewing Pro-LX Boot Up Sequence
Step Process
1
On Power up, print and the Lam Stepper Motor engage.
2
Print and Lamination Headlift Sensor checks for current open/closed state.
If either Sensor registers closed, the appropriate Headlift Motor engages until
Headlift Sensor detects open state.
Headlift Sensor detects open state.
3
Check SmartCard and Mag Sensors for presence of card.
If there is a card found in either location, the print and Lam Stepper Motors engage
to back the card out onto the flipper table.
to back the card out onto the flipper table.
4
Print TOF, Card Detection and LAM TOF Sensors check for presence of card.
If any Sensor finds a card, the card is fed onto the flipper table. The flipper table
then rotates and ejects the card into the reject bin.
then rotates and ejects the card into the reject bin.
5
The Flipper Clutch activates.
6
The Lam Stepper Motor engages.
7
The Flipper Home Sensor detects the homing flag and the Flipper Table levels.
8
The Flipper Clutch disengages
9
The Lam Stepper Motor disengages.