Ericsson SP4900HDR Manual Do Utilizador

1. Turn off the printer and unplug the power cord.

2. Remove the following parts:

•

Power cord and interface cables

•

All paper or other media

•

Roll paper spindle

•

Paper tray

•

Any optional components.

3. Leave the ink cartridges installed.

4. If you need to ship the printer, you must repack it using the original box 

and packing materials and secure it to a pallet. If you do not have these 
items, contact Epson to purchase them. Otherwise, the printer may be 
damaged beyond repair.

If you are transporting the printer in your own vehicle without the 
original packaging, make sure you wrap and pack the printer securely. 
Transport the printer in a horizontal position on a flat, stable surface.

5. Keep the printer level while moving it. 

Setting up the printer after transporting it is almost identical to setting it up 
for the first time.

Keep in mind that the first time you start printing after moving the printer, 
the print head nozzles may be clogged—especially if the printer hasn’t been 
turned on for a long time. You may need to run a cleaning cycle (page 120) 
and realign the print head (page 125) to ensure good print quality.

After setting up the printer, if you see a message on the LCD screen asking 
you whether you would like to run an auto nozzle check, select 

Y

 to start the 

nozzle check procedure.

Caution: Do not turn off 
the printer by unplugging 
it or turning off a power 
strip. You will not be able 
to lock the print head, and 
ink will leak out of the 
reservoir, damaging the 
printer.