Ericsson SP4900HDR Manual Do Utilizador

When your paper runs out, ink is low, or a problem occurs, a message 
appears on the LCD screen, and the lights on the control panel come on or 
flash. The following table lists the messages in alphabetical order and 
includes an explanation and instructions for correcting the problem.

BLACK INK ERROR

BLACK INK DOES NOT 
MATCH PRINT JOB

TO CANCEL PRINTING, 
PRESS THE 

 BUTTON

TO CHANGE BLACK INK TO 
PRINT, PRESS THE 

 

BUTTON

The type of black ink setting in 
the printer does not match the 
setting in the driver.

Press 

 to switch to the correct setting 

and continue printing.

BORDERLESS ERROR

LOAD A SUPPORTED PAPER 
SIZE OR LOAD PAPER 
CORRECTLY

The borderless setting is 
selected and paper that doesn’t 
support borderless printing is 
loaded.

Press 

 to cancel the print job. Change 

the setting in the printer driver or load 
different paper.

The sheet size is not 
recognized.

Make sure the paper is flat.

Paper is not loaded correctly.

Make sure paper is loaded correctly.

SpectroProofer is installed.

CALL FOR SERVICE

An error has occurred.

The number 3000 indicates that 
the power cord is not 
connected correctly.

Note the error number, then turn the printer 
off. Then check the power cord connection 
at both ends and turn it back on. If the 
message remains after restarting the printer 
several times, contact your service provider 
as described on page 13.

CARTRIDGE COVER OPEN

CLOSE RIGHT AND LEFT 
CARTRIDGE COVERS

The cartridge covers are open.

Close the left and right cartridge covers.

CARTRIDGE COVER OPEN

CLOSE LEFT CARTRIDGE 
COVER

The left cartridge cover is open. Close the left cartridge cover.

CARTRIDGE COVER OPEN

CLOSE RIGHT CARTRIDGE 
COVER

The right cartridge cover is 
open.

Close the right cartridge cover.