Samsung ML-3560 Series Manual Do Utilizador
Solving Problems
7.11
Engine Fuser
Low Heat Error
Low Heat Error
The temperature in the
fuser is abnormally low.
fuser is abnormally low.
Unplug the power cord and
plug it in again. If the
problem persists, call for
service.
plug it in again. If the
problem persists, call for
service.
Engine Fuser
Over Heat Error
Over Heat Error
The temperature in the
fuser is abnormally high.
fuser is abnormally high.
Unplug the power cord and
plug it in again. If the
problem persists, call for
service.
plug it in again. If the
problem persists, call for
service.
Engine Hsync
Error
Error
There is a problem in
your printer engine.
your printer engine.
Turn off and then on the
printer.
printer.
Engine LSU Error
A problem has occurred
in the LSU (Laser
Scanning Unit) in the
printer.
in the LSU (Laser
Scanning Unit) in the
printer.
Unplug the power cord and
plug it in again. If the
problem persists, call for
service.
plug it in again. If the
problem persists, call for
service.
Initialize
System
System
The printer is now
turning on.
turning on.
Wait until your printer turns
on completely.
on completely.
Load Manual
Press Cont Key
Press Cont Key
The Multi-Purpose Tray
is empty in manual feed
mode.
is empty in manual feed
mode.
Load a sheet of print
material and press the On
Line/Continue button.
You need to press the
button each page to be
printed.
material and press the On
Line/Continue button.
You need to press the
button each page to be
printed.
Load
[Size] In [Tray]
[Size] In [Tray]
The paper size specified
in the printer properties
does not match the
paper you are loading.
in the printer properties
does not match the
paper you are loading.
Load the correct paper in
the tray.
the tray.
Memory Overflow
The printer does not
have enough memory to
print the current job.
have enough memory to
print the current job.
The job will be
automatically cleared and
the printer will return to
ready mode.
Expand the memory in your
printer. See“Installing
Memory DIMM” on
page 9.1.
automatically cleared and
the printer will return to
ready mode.
Expand the memory in your
printer. See“Installing
Memory DIMM” on
page 9.1.
Menu
The Menu button is
pressed.
pressed.
Use the printer features.
Offline
The printer is off-line
and cannot print.
and cannot print.
Press the On Line/
Continue button.
Continue button.
Outbin Full
The output tray is full.
It can hold up to 250 sheets
of paper. Once the paper is
removed from the output
bin, the printer resumes
printing.
of paper. Once the paper is
removed from the output
bin, the printer resumes
printing.
Message
Status
Do this...
Message
Status
Do this...
Page Too Complex
Too complicated data
was sent to the printer.
was sent to the printer.
Simplify the page layout
and remove unnecessary
graphics from your
document.
If the message persists,
expand the memory in your
printer. See “Installing
Memory DIMM” on
page 9.1.
and remove unnecessary
graphics from your
document.
If the message persists,
expand the memory in your
printer. See “Installing
Memory DIMM” on
page 9.1.
Paper Empty
[Size] In [Tray]
[Size] In [Tray]
The displayed tray is
empty.
empty.
Load the corresponding size
of paper into the tray.
of paper into the tray.
Paper Jam 0
A paper jam occurs in
the paper feed area.
the paper feed area.
Paper Jam 1
A paper jam occurs
around the toner
cartridge.
around the toner
cartridge.
Paper Jam 2
A paper jam occurs in
the paper exit area.
the paper exit area.
Load Manual
The paper size specified
Press Cont key
in the printer properties
does not match the
paper you are loading.
does not match the
paper you are loading.
Load the correct paper and
press the On Line/
Continue button.
press the On Line/
Continue button.
Printing xxx
(xxx: Emulation)
(xxx: Emulation)
The printer is printing
jobs using the displayed
language.
jobs using the displayed
language.
Complete your printing.
Ready
The printer is on-line
and ready to printer.
and ready to printer.
Use your printer.
Ready
Close Tray 1
Close Tray 1
The Tray 1 is open but
there is paper in the
Multi-Purpose Tray.
there is paper in the
Multi-Purpose Tray.
Close the Tray 1 to clear the
message.
message.
Ready
Close Tray 2
Close Tray 2
The optional Tray 2 is
open but there is paper
in the Multi-Purpose
Tray.
open but there is paper
in the Multi-Purpose
Tray.
Close the optional Tray 2 to
clear the message.
clear the message.
Ready IP Conflict
An IP address conflicts
with other devices on
the network.
with other devices on
the network.
Contact your network
administrator and choose
an address within your
subnet which will not
conflict with any other
devices.
administrator and choose
an address within your
subnet which will not
conflict with any other
devices.
Ready
Low Toner
Low Toner
The toner cartridge in
your printer is nearly
empty.
your printer is nearly
empty.
Redistribute the toner,
referring to page 6.2.
referring to page 6.2.