Samsung M202x Manual Do Utilizador

Página de 199
91
2.  Using a Network-connected Machine
IPv6 configuration
 
IPv6 is supported properly only in Windows Vista or higher.
 
In the IPv6 network environment, follow the next procedure to use the IPv6 
address.
From the SyncThru™ Web Service
Activating IPv6
1
Access a web browser, such as Internet Explorer, from Windows. Enter 
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and 
press the Enter key or click Go.
If it’s your first time logging into SyncThru™ Web Service you need to 
log-in as an administrator. Type in the below default ID and password. 
We recommend you to change the default password for security 
reasons.
ID: admin
Password: sec00000 
When the SyncThru™ Web Service window opens, move the mouse 
cursor over the Settings of the top menu bar and then click Network 
Settings
.
Click TCP/IPv6 on the left pane of the website.
Check the IPv6 Protocol check box to activate IPv6.
Click the Apply button.
Turn the machine off and turn it on again.
 
You can also set the DHCPv6.
To manually set the IPv6 address:
Check the Manual Address check box. Then, the Address/Prefix text 
box is activated. Enter the rest of the address 
(e.g.,:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A 
through F).