Samsung SPP-R200 Manual Do Utilizador

 

 
 
 
1) Press the MSR cover to open. 
 
 
 
 
 
 
2) Insert the card as shown in the image 

and swipe in the direction of the arrow. 
(can be done in both directions) 

 
3) When finished using, press the MSR 

cover to close it. 

 

If the card does not register, first check to see if 
it is properly aligned.    When swiping the card, 
the recommended swiping speed is 100 ~ 1500 
mm/sec. 
 

Run the self-test when first setting the printer or when encountering a problem, and check 
the following. 
 

- Control Circuit, Mechanisms, Print Quality, ROM Version, and Memory Switch Settings 

 
If no issue is found with the printer after running the self-test, examine the other devices or 
peripherals and software.  This function is independent of such other devices and 
software. 
 
 

 

1) Turn the printer power off and close the printer paper cover. 

2) Pressing the paper feed button and power button simultaneously turns the printer on. 

3) The printout is produced after releasing the two buttons. 

4) To add a printout of the ASCII pattern, press the paper feed button once more. 

5) After the ASCII pattern is printed out, the self-test is automatically terminated.