Samsung SRP-770II Manual Do Utilizador

ٻ

ڑٻ

2. Samsung Label Printer 

Feed Button 

Cover Peel-off 

Status Indicator 

Cover Open/Close

Power Switch 

Printer Head 

Paper Holder 

Paper Guide 

Peel-off Sensor 

Paper(gap) Sensor 

Paper Adjuster 

Power Connector 

Interface Connectors 
[RS-232C, IEEE1284, USB] 

Dip Switch 

Ov—›–•PG

Auto Cutter 

ٻ

ڒ

3. Connecting the Power Supply 

 

When connecting or disconnecting the power supply from the printer, make sure that 

the power supply is not plugged into an electrical outlet.    And the power supply’s 
rated voltage and your outlet’s voltage do not match, contact your dealer for 
assistance. Then do not plug in the power cord. Otherwise, you may damage the 
power supply or the printer. 

1. Make sure that the printer’s power switch is turned off, and the power supply’s power 

  cord is unplugged from the electrical outlet. 

2. Check the label on the power supply to make sure that the voltage required by the 

power supply matches that of your electrical outlet. 

3. Plug in the power supply’s cable as shown below. Notice that the flat side of the 
    plug faces down.